Pick Scraper PX-2
Specification
| Model | PX-2 |
|---|---|
| Dimensions (L x W x H) | 1217×216※1×411〜478 |
| Weight | 19kg(Electric Hammer + Wheel stand) |
| Electric hammer | |
| Model | Makita ® HM0810 |
| Power Input | 900W |
| Blows per minute | 2900min-1 |
| Power Cord | 1.25mm2 x 10m (Detachable type) |
| Attachment | Bull Point, 1pc Chisel (for Makita), 1pc Hex L Wrench 6mm (long type), 1pc Open Ended Spanner 10x12mm, 1pc Open Ended Spanner 17x19mm, 1pc Side Handle, 1 set Anti-vibration Gloves, 1 pair Tool Bag, 1 pc |
Features
Ergonomically designed and stand-up operation.
Special ergonomic design allows operator stand comfortably upright and release backache while operation.
Scraper blade can also be installed for easy scraping and removing materials.
By the Installation of scraper shank with blade, enable to perform scraping and removing materials such as resin mortar, MMA, hard urethane, PVC, long material sheet, etc.
Perform maximum demolition power.
Standing posture helps to create powerful impact demolition performance which ideal for applications such as breaking or chipping concrete, instead of holding the electric hammer.
Adjustable cutting head angle
Adjustable cutting head angle from 37º up to 45º by operate the clamp lever.
 |
 |
Adjustable handle position.
Selectable side handles position and adjustable handle grip for both vertical and horizontal position.
 |
 |
Wheel Stand Kit
 |
|
||||||||||||||||||||||
Features
Available to fit Hitachi and Makita model electric hammers.
If you have your own electric hammer as below models, you can optionally buy this wheel stand kit for stand-up working operation. ( Clamp replacement is needed for the fitting.)| Hitachi model | Makita model | ||
 |
 |
 |
 |
| H41SA2(S) | H41SA2 | HMK0810 | HM0830 |
Tools for PX-2
