Floor Surface Preparation Machines and Equipment

Removal of epoxy thick layer

HOME > English TOP > See Linax in Action > Removal of epoxy thick layer

Removal of epoxy thick layer

Application:

Removes epoxy thick layer (thickness: 2~3mm).

Floor Grinder K-60

Preparation Method:

By taking account the form of installed anchor bolt or uneven surface on concrete, select cutting or scarifying method to remove epoxy layer.

Floor Scarifier F-22

Apply cutter with:

A.Insert Cutter [SD Tip]
交換用SDチップ
B.8P Cutter
F-22用8Pカッターブレード&シャフトセット

Applicable machine:

A. Floor Grinders: K-60 Ser
B. Scarifiers: F-22 Series

Performances:

A. Floor Grinders: 60~80m²/hour; 4hrs/set
B. Scarifiers: 20~25m²/hour; 120~150hrs/set

*** The working performance or the cutter consumption may be carrying out differently according to the conditions of flooring materials, floor hardness, adhesiveness and etc at the job sites. ***


If the concrete surface is seriously uneven or anchor bolts are installed on concrete, it would be better to apply scarifying method instead of grinding, because the installed anchor bolt will damage the Tip Cutter (Dia Tip) easily while operating.
Please browse Scarifiers F Series for more details.

Contact Us

Copyright(C) LINAX co.,ltd. All Rights Reserved.